Titan Implement 9300BU Series, Руководство по эксплуатации и запасным частям

Страница: 24 / 36

9300BU Bale Unroller 24 Titan Implement, LLC
January 2016 (423) 334-0012
7.2 Greasing
Grease zerks are located on the bale spike pins and
the arm pivot bushings.
Item Location Qty.
1 Bale Spike Pins 2
2 Arm Pivot Bushings 2
Grease all zerks every fi fty hours of operation. Use
an SAE multipurpose high-temperature grease with
extreme pressure (EP) performance. Also acceptable
is an SAE multipurpose lithium base grease.
1. Always use a handheld grease gun for all greasing.
2. Wipe grease zerks with a clean cloth before
greasing to avoid injecting dirt and grit.
3. Apply grease until new grease can be seen coming
out of the joint.
4. Do not let excess grease collect on or around parts,
particularly when operating in sandy areas.
5. Replace broken grease zerks immediately.
6. If any grease zerk will not take grease, remove
and clean it thoroughly. Also clean the lubricant
passageway. Replace the zerk if necessary.
7.3 Welding Repairs
Before performing any type of welding repair to
the bale unroller, contact Titan Implement for
approval. Repair welding must be done with
care and with procedures that may be beyond the
capabilities of the ordinary welder.
WARNING
Personal Injury Hazard
Repairs or modifi cations to the bale unroller
can result in serious injury or death should
these repairs fail.
NOTICE
Anyone performing a welding repair should be certifi ed
in accordance to the American Welding Society (AWS)
standards.