background image

9300BU Bale Unroller 

20 

Titan Implement, LLC               

January 2016 

 

(423) 334-0012 

4.10  Unrolling a Bale

1.  Remove the wrap and any twine or netting from the 

bale before unrolling. 

WARNING

Make sure brakes are securely set before getting off  
the tractor. 
NEVER place any part of your body under the raised 
bale when removing twine or netting from the bale. 

2.  Lower the bale to the ground and drive forward 

slowly to unroll the bale. 

3.  As the bale unrolls, it may be necessary to continue 

lowering the bale to keep it in contact with the 
ground.

4.  Look forward to avoid any obstacles or livestock that 

might be in the way.

5.  When the desired amount of hay has unrolled, raise 

the 3-point hitch and the bale will stop unrolling.

6.  Drive the tractor outside the feeding area, and 

release the remaining portion of the bale, if any, for 
feeding at a later time.

4.11   Detaching From Tractor 

1.  Move the bale unroller to a level storage location, 

extend the parking stand, and lower it to the 
ground or onto blocks.  Park the tractor, place 
the transmission in park or neutral, and apply the 
parking brake.  Shut down the engine, remove the 
key, and wait for all motion to come to a complete 
stop before exiting the tractor.  Before disconnecting 
the bale unroller, the PTO must be disengaged and 
blade rotation at a complete stop.

2.  Make sure the bale unroller is resting securely on 

the ground or blocks, and the wheels are chocked 
before attempting to disconnect it from the tractor.  

WARNING

C

rush Hazard

 

Keep  feet  and  hands  from  under  the  bale 
unroller and clear of any pinch points caused 

by  the  tractor  hitch  arms  and  bale  unroller  hitch 
pins.  Never operate the hydraulic 3-point lift controls 
while someone is directly behind the tractor.

3.  Extend or retract the tractor 3-point hitch top link to 

remove tension on the top link hitch pin.  When the 
pin is loose and easy to rotate, remove the pin from 
the top link.  Disconnect the lift arms.

4.  Disconnect the hydraulic hoses from the tractor. 

Store the hoses on the bale unroller A-Frame.

CAUTION

   

Explosive Separation Hazard

 

Be  sure  all  hydraulic  pressure  is  relieved 
before disconnecting hydraulic line or fi ttings 
between  the  bale  unroller  and  the  tractor 
hydraulic system. 

Содержание 9300BU Series





































Отзывы: