background image

Titan Implement, LLC 

21 

9300BU Bale Unroller 

(423) 334-0012 

January 2016

5.  

Transporting

5.1   Transporting Safety (Road)

Refer to “2.4 General Safety Instructions” on page 
10 for general transporting safety requirements.

WARNING

The  following  safety  instructions  are  provided  to 
help prevent serious injury and possibly even death.

THINK

SAFETY!

Operating the Tractor

 

Before  attaching  the  bale  unroller  to  the 
tractor, be familiar with its controls and how 

to stop it quickly in the event of an emergency.  Read 
and  understand  this  manual  and  the  one  provided 
with  your  tractor  before  transporting  the  bale 
unroller.

SAFETY
INSTRUCTIONS

The  following  safety  instructions  are  provided  to 
help prevent injury or limit equipment damage.

Drive Safely  

Be  a  safe  and  courteous  driver.    Anticipate 
what  other  drivers  will  do  and  drive 

accordingly.

Allow Extra Distance  

Apply  brakes  early.  Leave  extra  distance 
between your vehicle and the one(s) ahead to 

provide  adequate  stopping  space.  Extra  distance 
will be required to stop the vehicle.  

Clear Vision

 

Remove all objects from the area that would 
prevent  clear  vision  of  the  complete  work 

area or would present an obstacle when moving the 
bale unroller.

Hitch Attachment

 

Be sure the bale unroller is securely attached 
to the tractor and in good operating condition 

before using.

Working Taillights

 

Make  sure  lights  on  the  tractor  are  working 
properly.

SAFETY
INSTRUCTIONS

Additional Lighting

 

For  bale  unrollers  without  lights,  install 
additional lights on the rear of the tractor to 

safeguard  against  rear-end  collisions.  Daybreak 
and dusk are particularly dangerous and rear pilot 
vehicles are recommended.  Bale unrollers without 
lights  should  be  transported  on  public  roads  only 
during daylight hours.

Hazard Flashers

 

Use  hazard  fl ashers  on  the  tractor  when 
transporting unless prohibited by law.

Right-of-Way

 

When travelling below the posted speed limit,  
keep to the right and yield the right-of-way to 

allow faster traffi

  c to pass.

Maximum Transporting Speed

 

Do not exceed 15 MPH when transporting the 
bale  unroller.  Slow  down  for  corners  and 

rough terrain.   

Visibility

 

Clean refl ectors, SMV or SIS sign, and 
lights before towing.  Make sure all the 

lights  and  refl ectors  required  by  highway  and 
transport  authorities  are  in  place  and  can  be  seen 
clearly by all overtaking and oncoming traffi

  c. 

Make  sure  large  round  bales  transported  on  the 
tractor rear 3-point hitch do not obstruct visibility of 
the tractor’s fl ashing lights or SMV sign.

Regulations

 

Make  sure  all  local,  state,  and  federal 

regulations,  regarding  the  transport  of 

equipment on public roads and highways, are met.  
Check  with  the  local  authorities  regarding 
transporting the bale unroller on public roads. Obey 
all applicable laws and regulations. 

Tractor Owner/Operator Manual

 

Always refer to the tractor Operator’s Manual 
to determine its compatibility and maximum 

safety.

Содержание 9300BU Series





































Отзывы: