Tintometer 15150001, Инструкция по эксплуатации

Страница: 107 / 176

XD 7500 Operation
107
ba77191e01 - 71310060 04/2018
4.10.2 Analysis timer
Between the individual steps of a measurement, reaction times often have to
be observed. The length of the reaction time is defined in the relevant analy-
sis instructions.
For all required reaction times, the analysis timers with the corresponding
time intervals are stored in the instrument. The names of the analysis timers
include the method name and a current number so several timers within a
method can be distinguished from each other.
To be able to use an analysis timer for a method you have to load it first in
the timer overview.
To do so, first select the required method and then add the available analysis
timers to the timer overview so they can be started as necessary.
The timer overview always comprises the free timer and the selected analysis
timers.
The Timer menu opens.
1
Highlight the User defined timer .
2
If necessary, change the name
and time of the timer with
[Edit] .
3
Start the highlighted timer with
[Start] .
The status of the timer is Active .
When the specified time interval
has expired, and audio signal
sounds and the timer status
changes to
Expired .
4
Stop the highlighted timer with
[Stop] .
The status of the time changes to
Inactive . The audio signal is
switched off.
1
Select the required method in the
Concentration mode.
Manual selection of the method
(see Section 4.5.5).
<TIMER>
Timer 16.01.17 9:52
Designation Time Status
User defined timer 00:15:00 Inactiv
- 1 00:15:00 Inactiv
Start Stop Edit Add