manualshive.com logo in svg

Timewave DSP-D300, Руководство пользователя

Поделиться
Скачать
Timewave DSP-D300 Скачать руководство пользователя страница 72

 

Appendix: Updating the Firmware 

 

 
The three main processors and two sub-processors can be individually updated.  It is 
recommended that all the processors be updated at the same time for compatibility 
purposes, however within a point update updates may be intermixed unless specified 
otherwise. 
 
For instance, if updating from 2.1.60612 to 2.2.70503, then a full update is needed on all 
three sections; but if updating from 2.2.70302 to 2.2.70503, then it may be done one 
section at a time. 
 

 

WARNING!  

Do not attempt to update the Firmware unless specifically told to 

do so by Timewave Technology. 

 

 

 

NOTE!  

Each part of the update must be done COMPLETELY.  A partial update 

may result in a non-functional unit. 

 
 

ALWAYS check the Timewave website for the latest versions of the 
Firmware.  DO NOT use more than one version on a D300 box.  There will 
be updates in the same version (new build dates). 

 
 

The firmware may be procured from: 

 
 

http://www.timewave.com/support/DSP-D300/d300support.htm

 

 

 
 

Содержание DSP-D300

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды