Timewave DSP-D300 Скачать руководство пользователя страница 102

Страница: 102 / 112

102

•

I accidentally plugged the Audio Cable into the Ethernet connector.

Send the D300 back to Timewave for repairs.

•

I accidentally used the wrong firmware/file for an update.

If the file was for the CPU or COM, redo the update. If it is older than
version 3, then the hardware update procedure is needed.

Send the D300 back to Timewave for repairs.

•

I cannot connect to a new DSP-D300 from an old version of Control300.

Update Control300.

•

I cannot connect to a old DSP-D300 from Control300.

If your PC is running Windows XP64 or Vista64, you cannot access old
DSP-D300s. Try a virtual machine.

If there is still a problem, contact Timewave Technical Support.

Timewave Technical Support
1025 Selby Ave, Suite 101
St. Paul, MN 55104
(651) 489-5080

[email protected]

Содержание DSP-D300
















































































































Результаты поиска

Содержание DSP-D300

Отзывы:

Бренды по названию

Популярные бренды

Timewave DSP-D300, Руководство пользователя

Результаты поиска

Содержание DSP-D300

Отзывы:

Бренды по названию

Популярные бренды