Timewave DSP-D300, Руководство пользователя

Страница: 54 / 112

Figure 25: DSP-D300 Add Port Screen
Either enter a TCP port number, or choose a COM port to watch. If the COM driver is
non-standard, choose
Manual COM Port
and enter the port number in the COM Port
box.
Note: Ethernet port 23 is standard for Telnet.
Auto-Recovery
Auto-Recovery takes partial packets and attempts to recover data from them. It is useful
for high noise environments, but may result in faulty data. This was always on in the
original CommRead system.
This is done by taking two packets of data and attempting all possible combinations of
data between them.
Real Packet 44 61 C5 C0
Recovered 61 C5 C0 50
Recovered C5 C0 50
7F
Recovered C0 50 7F 2A
Real Packet 50 7F 2A 12
Note that the second real packet may not have been entirely read (it may be a remnant or
extra information sent by the DSP) so it may not appear in the log.
54