Timewave DSP-D300, Руководство пользователя

Страница: 11 / 112

DSP-D300 Shell (Command Line)
The shell is a UNIX style command line that allows the system to be configured. This is
similar to a UNIX bash shell or a DOS command prompt. A basic knowledge of
command line use is recommended for this section.
There are two versions of the command line shell, the first (hereafter called Type A) is
used with versions 1.0-3.5. The second (Type B) is a faster, simplified and standardized
one new to version 3.6 and higher.
Accessing the Shell
A new box has a “root” account with a password of “foo”. See the section below on
adduser
(page 13) for adding more users for Type A shells.
SSH from UNIX or Cygwin
To connect via SSH to the D300, follow the following procedure:
$ssh 192.168.3.238 -lroot
root@192.168.3.238's password: foo
OpenSSH Version OpenSSH_3.7p1, see http://www.openssh.org
Shell Version 1.0, Copyright (c) 2004-2005, Timewave Technology Inc.
Build Jul 1 2005 13:05:22 RC2
$
At this point the connection is complete. The “$” prompt is from the D300 shell.
Please note that the password prompt may take up to a minute to appear.
SSH is certified under the FIPS 140-2 regulations, and is applicable in the
following modes:
•
**AES (128, 192, 256)
•
*Triple-DES
•
*RSA
•
*HMAC-SHA-1
•
**HMAC-MD5
•
*HMAC-SHA-1 96
•
*CAST-128
•
*Blowfish
•
*Arcfour
•
#HMAC-RipeMD
•
#HMAC-MD5 96;
* indicates an available mode
** indicates a common mode used for SSH 2.0
# indicates a common mode in SSH 2.0 that is not FIPS certified
11