manualshive.com logo in svg

Timewave DSP-D300, Руководство пользователя

Поделиться
Скачать
Timewave DSP-D300 Скачать руководство пользователя страница 50

 

Show/Edit the filter. 

 

 

Figure 15: DSP-D300 Control300 Filter Editor 

 
Choose the range to edit from the tree on the left.  Adjust the filter by clicking on the 
address to turn off or on.  To disable or enable all addresses, click on Enable All or 
Disable All.  Enable Range and Disable Range work just on the selected range. 
 
The filter may be saved for future use.  Choose Save to save the filter.  Load reads it back 
in. 
 
Check on OK to activate the changed filter.  This will implemented immediately, unlike 
the command line updates (see page 15, 

IFLOWS

). 

Changing the Receive Frequency 

The DSP-D300 allows for the loading of different DSP “filters” that receive different 
frequencies of telemetry data.  This option is found in the DSP Settings. 
 

 

Figure 17: DSP-D300 Control300 Frequency Editor 

 

 

50

Содержание DSP-D300

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды