manualshive.com logo in svg

Timewave DSP-D300, Руководство пользователя

Поделиться
Скачать
Timewave DSP-D300 Скачать руководство пользователя страница 57

CommReadTW 

This is a new-style CommReadTW log. 

Control300 

This is a IFLOWS log file generated by Control300. 

•

 

Select a center tone frequency for compare filtering.  This will not change the 
imported data.  This only affects the compared data.  If there is no center tone file, 
leave this at “All Frequencies”. 

•

 

Click on “Compare”.  See 

Comparing

, below. 

 
 

Comparing 

To compare the imported files, click on “Compare”.  The two imported databases will be 
compared for size and matching entries. 
 

 

Figure 27: DSP-D300 LogCompareTW Compare Screen 

 
There are several types of reports that may be generated.  This are: 
 

Report Description 
Export CDF 

This will create a comma delimited file (CDF) of the 
compared data. 

Export Excel 

This will create an Excel (XLS) worksheet. 

Save SDF 

This creates a preformatted space delimited file (SDF). 

 

Filtering 

The imported databases (especially DataChron) may contain a lot of data from sources 
other than that wanted for comparison.  The databases may be filtered for source and 
duplicates; the comparison may be filtered by frequency (if a tone file is loaded) and date. 
 

 

57

Содержание DSP-D300

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды