Timewave DSP-D300, Руководство пользователя

Страница: 35 / 112

Gain The amount of digital gain to add to the input signal. See
Adjusting
Input Threshold
below.
dBm The digital level of the audio into the D300. This is measured in dBm.
If you are using 300
Ω termination it is necessary to set whether the
line is terminated in the Options.
Front/Rear Volume The output volume (attenuation). The left channel is the adjusted
input signal, whereas the right channel is the diagnostic output.
Local Port The Local COM port to monitor the output from the PC.
To interact with the serial data being shown on the diagnostic terminal monitor, click on
Terminal and all keystrokes will be captured and sent to the terminal.
The terminal monitor has many messages displaying the status of the D300. These
include cable status, packet decoded information, and “telnet” connection status..
File Menu
Open
Open the selected DSP-D300. The unit is selected by the clicking on
the unit wanted on the list to the right of the main screen.
Close Close the opened DSP-D300.
Exit Exit Control300.
Edit Menu
Copy
Copy the selected text in the terminal window.
Paste Paste the clipboard to the terminal window.
Filter Edit the IFLOWS filter. See
Setting the IFLOWS filter
on Page 33.
35