FUEL
WARNING
•
Gasoline is very flammable. Avoid smoking or bringing any flame or
sparks near fuel.
•
Wipe up all spills before starting the engine.
•
Make sure to stop the engine and allow it cool before refueling theunit.
•
Keep open flames away from the area where fuel is handled or stored.
IMPORTANT
•
Never use oil for 4 cycle engine use or water cooled 2-cycle engine.
•
Never use "FUEL WITH NO OIL (RAW GASOLINE)".
•
Never use fuel laced with water.
•
Mixed fuels which have been left unused for a period of one month or more may clog the carburetor or re-
sult in the engine failing to operate properly. Put remained fuel into an air-tight container and keep it in the
dark and cool room.
•
Please ask for “mixed gasoline for air-cooled 2-cycle engines” at your nearest gas station, or use fuel mad-
e by putting unleaded gasoline for automobiles and air-cooled 2-cycle engine oil into a mixing container in
accordance with the following ratios and then shaking to mix well.
Mixing ratios: 25:1
(40 ml of oil for every 1 liter of gasoline)
NOTE
Please use 90# gasoline and oil.
5.Set up
6.Operation
PRIMING THE PUMP
Before starting the engine, remove the filler cap from the
pump chamber, and completely fill the pump chamber
with water. Reinstall the filler cap, and tighten it securely.
NOTE
Operating the pump dry will destroy the pump seal. If the pump has been operated dry, stop the engine imm-
ediately, and allow the pump to cool before priming.
GB 9
