Tieline i-Mix G3, Основное руководство по эксплуатации

Страница: 21 / 355

Section 4: Introduction to the Codec
T
ieline
Page 21
T E C H N O L O G Y
•
How v.1.6 version software automatically upgrades v.1.0.2
and v.1.0.4 USB software to v.1.0.9;
•
Upgrades are performed either; when firmware is upgraded
and a USB module is in a codec; or subsequently when a
module is inserted into a codec - a screen appears while the
upgrade is performed and it takes about 10 seconds to
perform.
•
Use of USB modems and USB modules to connect over 3G.
Programming a new network into a codec using the "Custom Access
Point" setting in the
GSM LL/GSM/USB-3G
tab in
Tool Box
.
Sending data using the "encode only" and "decode only" functions.
3G idle timeout feature added to minimize data costs.
IP Dialing error messages when dialing:
•
To an "incompatible jitter buffer" device
•
Using the Raw algorithm where jitter buffer is disabled
automatically.
4.2.1. Adjustments in this Reference Manual
The features outlined in this reference manual supersede the information
contained in the previous manual which was titled
“TLR300B_Commander_G3_Rack_Unit_PLUS_Main_Man_v.4.0.”
Following is a summary of the amendments made to this reference manual:
The “IP Streaming” and “3GIP” sections have been extracted and
consolidated into the “IP & 3GIP Streaming Reference Manual”.
The “LAN Tab” section discussing LAN connection of codecs has
been extracted and consolidated into the “IP & 3GIP Streaming
Reference Manual”.
All
Tool Box
3G programming has been consolidated into the “IP &
3GIP Streaming Reference Manual”.
The ISDN section has been updated with more detailed connection
and troubleshooting information.
The TLG3 GUI application for controlling rack unit codecs has the
following new features:
- The GUI is fully resizable on a screen.
- Multiple windows/applications of the GUI can run simultaneously.
- Windows can be tiled or cascaded.
- A Toolbar provides the ability to restore minimised windows.
Caveats:
- Supports multiple TCP connections but with only 1 UDP, 1 Serial or
1 USB connection at the same time.