Thunder 75P-T6-Multi-Charger, Руководство пользователя

Страница: 3 / 37

termination program works on the principle of the Delta-
peak voltage detection. (NiCd/NiMH)
Auto-charge current limit: When charging NiCd or NiMH
at “AUTO” current mode, you can set the upper limit of
charge current to avoid from high current charging. This
is very useful when charging the low impedance and
small capacity NiMH battery in “AUTO” mode.
Capacity limit: The charging capacity always calculated
by multiple of the charging current and time. If the
charging capacity exceeds the limit the process will be
terminated automatically when you set the maximum
value.
Temperature limit: The temperature of the battery on
charging will rise by its internal chemical reaction. If you
set the limit of temperature the process will be expired
forcibly when the limit has reached.
Processing time limit: You can also restrain the
maximum process time to prevent from any possible
defect.
Input power monitor: To protect the car battery using
as DC input power from being damaged the voltage of
it always monitored. If it drops below the lower limit the
process will be ended automatically.
Data store/load
For users convenience it can store maximum 5 data of
different batteries. You can establish the data contains
program setting of the battery to charge or discharge
continually. These data can be called out at any time you
need and the process can be executed without program
setting.