Thunder 75P-T6-Multi-Charger, Руководство пользователя

Страница: 16 / 37

pack.
After setting the current
and voltage press
Start/
Enter
key for more than 3
seconds to start the process.
(Charge current: 0.1—
5.0A, Voltage: 1—6 series)
This shows the number of cells you set up and the
processor detects. “R:” shows the number of cells
found by the charger and “S:” is the number of cells
selected by you at the previous screen. If both numbers
are identical you can start
charging by press
Start/
Enter
button. If not, press
Batt type/Stop
button
to go back to previous
screen. Then carefully
check the number of cells of
the battery pack to charge
again.
The screen shows the
present situation during
charge process. To stop
c h a r g i n g p r e s s
B at t
type/Stop
key once.
Charging Lithium battery at balance mode
This is for balancing the voltages of Lithium batteries
R:3 SER S:3SER
CONFIRM(ENTER)
Display Display
Start
Enter
Li3S 2.0A 12.59V
CHG 022:43 00682
Display Display
number
of
cells
charging
time
charge
current
battery
voltage
charged
capacity
LiPo CHARGE
2.0A 11.1V(3S)
Display
- +
DEC INC
Display
- +
DEC INC
Batt type
Stop
Start
Enter '>3 seconds'