Thunder 75P-T6-Multi-Charger Скачать руководство пользователя страница 4

Страница: 4 / 37

Cyclic charging/discharging

Perform 1 to 5 cycles of charge> discharge or

discharge> charge continually for battery refreshing and

balancing.

PC based analysis using USB communication

For technical expert, it offers PC based program can

analysis the characteristic of the battery by USB port.

It shows a graph of voltage, current, capacity and

temperature curves. It also shows the individual voltage

of each cell in the Lithium battery pack.

PC-LINK USB adaptor can be purchased separately.

Warnings and safety notes

Those warnings and safety notes are particularly

important. Please follow the instructions for a maximum

safety; otherwise the charger and the battery can be

damaged violently. And also it can cause a

ﬁre

to injure a

human body or to lose the property.

1.Never leave the charger unsupervised when it is

connected to its power supply. If any malfunction is

observed immediately terminate the process and refer to

the operation manual.

2.Keep away the charger from dust, damp, rain, heat

direct sunshine and vibration. Do not drop it.

3.The circuit of this charger is designed to be powered

by a 12V DC. But do not supply both input power

simultaneously. The circuit can be damaged permanently.

4.This charger and battery to be charged and

discharged should be set up on a head-resistant, non-

inflammable and non-conductive surface. Never place

them on a car seat, carpet or similar.

Содержание 75P-T6-Multi-Charger






































Результаты поиска

Содержание 75P-T6-Multi-Charger

Отзывы:

Похожие инструкции для 75P-T6-Multi-Charger

Бренды по названию

Популярные бренды

Thunder 75P-T6-Multi-Charger, Руководство пользователя

Результаты поиска

Содержание 75P-T6-Multi-Charger

Отзывы:

Похожие инструкции для 75P-T6-Multi-Charger

Бренды по названию

Популярные бренды