THORLABS KBD101 страница 79 Скачать руководство пользователя

Страница: 79 / 80

Brushless DC Servo Driver K-Cube

Appendix F Thorlabs Worldwide Contacts

For technical support or sales inquiries, please visit us at www.thorlabs.com/contact

for our most up-to-date contact information.

Thorlabs verifies our compliance with the WEEE (Waste Electrical and

Electronic Equipment) directive of the European Community and the

corresponding national laws. Accordingly, all end users in the EC may return

"end of life" Annex I category electrical and electronic equipment sold after

August 13, 2005 to Thorlabs, without incurring disposal charges. Eligible units

are marked with the crossed out "wheelie bin" logo (see right), were sold to

and are currently owned by a company or institute within the EC, and are not

dissembled or contaminated. Contact Thorlabs for more information. Waste

treatment is your own responsibility. "End of life" units must be returned to

Thorlabs or handed to a company specializing in waste recovery. Do not

dispose of the unit in a litter bin or at a public waste disposal site.

USA, Canada, and South America

Thorlabs, Inc.

[email protected]

Europe

Thorlabs GmbH

[email protected]

France

Thorlabs SAS

[email protected]

Japan

Thorlabs Japan Inc.

[email protected]

UK and Ireland

Thorlabs Ltd.

[email protected]

Scandinavia

Thorlabs Sweden AB

[email protected]

Brazil

Thorlabs Vendas de Fotônicos Ltda.

[email protected]

China

Thorlabs China

[email protected]

Содержание KBD101

















































































Результаты поиска

Содержание KBD101

Отзывы:

Похожие инструкции для KBD101

Бренды по названию

Популярные бренды

THORLABS KBD101, Руководство пользователя

Результаты поиска

Содержание KBD101

Отзывы:

Похожие инструкции для KBD101

Бренды по названию

Популярные бренды