THORLABS BC207UV, Руководство по эксплуатации

Страница: 44 / 181

BC207 Series Chapter 5: The Graphics User Interface (GUI)
Page 37
MTN026962-D02
Parameter Value
Save Static Voltage Level 0.0V U 5.5V
Trigger Input Low 0 to 0.5 V
Trigger Input High 2.4 V to 5.5 V
Input Impedance > 100 kΩ
Pulse Width (Min) 100 µ s
Trigger Delay 0.27 µ s
Trigger Input TTL Level, LVTTL compatible, BNC Jack
Note
Use only shielded coaxial cables for connecting the trigger source. Do not connect a trigger
cable without a signal source because it may capture disturbing pulses that may trigger the
shutter.
2) Click the icon in the tool bar .
3) Switch the camera in the beam Software to the mode Single Pulse to activate the response
to a hardware trigger.
Please be aware that discrimination between single pulses is limited to about 10 Hz, highly de-
pendent on the acquisition settings and the PC.
24