THORLABS BC207UV, Руководство по эксплуатации

Страница: 28 / 181

BC207 Series Chapter 5: The Graphics User Interface (GUI)
Page 21
MTN026962-D02
Reset Application Settings to Defaults
This button resets all BEAM application settings to defaults:
Application Setting Default Value Explanation
Intensity Threshold Disabled
Auto Exposure Enabled Exposure time set to automatic
Trigger Mode No Trigger Instrument set to continuous data acquisition
Region of Interest Full Size ROI is set to full sensor size.
Calculation Area Preset
Auto
Rectangle Software determines a rectangular area in which the
power level is above the clip level.
Calculation Area Clip
Level
1.0 %
For defining the Calculation Area in automatic mode,
the lower intensities limit is set to 1% of the peak in-
tensity to clip noise.
Averaging Mode None No averaging
Clip Level 13.50 %
The clip level for calculating the ellipse and beam
width is set to 13.5% of the difference between the
baseline and the peak intensity.
Measurement Method All Pixels All pixels are used for calculation, no slit emulation.
Hold Maximum Disabled
Approximate Ellipse Enabled
The ellipse is approximated to get a smooth surround-
ing.
Autoscale to Peak Enabled
The diagrams that show intensities, are scaled to the
peak intensity.
Profile Cut Position
Peak Posi-
tion
The X and Y profiles are taken from the row and
column where the peak is located.
Reference Position
Sensor
Center
Reference position is set to the sensor center. Cen-
troid and peak positions are calculated relative to the
reference position.
Position Unit µm All position units are displayed in µm.
Power Unit mW All power units are displayed in mW.
Plot Method Latest Data
After reaching the max. number of data to be plotted,
with the next data acquisition the first data set will be
discarded and the the most recent set will be added.
Plot Interval Every Meas. For every measurement, the data are plotted
Max. Data Points 100000 The maximum number of data to be plotted
Velocity 200 mm/s Translation speed of the stage
Hot Pixel Correction
Weak see chapter Hot Pixel Correction
Language
The language of the application can be selected.
34