THORLABS BC207UV, Руководство по эксплуатации

Страница: 56 / 181

BC207 Series Chapter 5: The Graphics User Interface (GUI)
Page 49
MTN026962-D02
Toolbar Icon Associated Action
Distance Measurement Mode
The distance measurement editor opens a table beside the
projection image. When drawing lines into the projection
image, the distance is inserted into the table. A maximum of 10
distances can be drawn. Remove a distance entry by selecting
the entry and pressing the "DEL" key or select the entry and
choose the "Delete Distance" entry from the context menu.
The reference position for calculations can be displayed or hid-
den as a grey crosshair by toggling the
button. A drop-
down menu allows to set the reference to typical positions or to
define a user position. Detailed explanations please see in
section
Beam Settings .
The Calculation Area is a subarea of the ROI. It can be dis-
played or hidden by toggling the
button. Only pixels within
this Calculation Area are interrogated and recognized for beam
data calculation.
A drop-down menu allows to make a choice from several pre-
sets; additionally a rectangular or elliptical calculation area can
be defined by the user. Detailed explanations please see in
section
Beam Settings .
The crosshair, that shows the X and Y profile cuts for calcula-
tion, can be displayed or hidden by toggling the
button.
The position of these X and Y cross sections can be fixed to
the ROI Center, the centroid, the peak or to a user defined po-
sition.
Additionally, X and Y profiles and their curve fits can be drawn
into the 2D graph displaying the power distribution within a ho-
rizontal and a vertical cross section.
Please see also section
Beam Settings .
This button locks or unlocks the mouse interactions within the
2D Projection.
If the window height is smaller than the full toolbar, the lower symbols are packed into a context
menu which is accessible via an arrow button on the bottom of the toolbar.
43
40
43