THORLABS BBD301 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 85

background image

Chapter 5

Page 33

5.8 Graphical Control of Motor Positions (Point and Move)

The GUI panel display can be changed to a graphical display, showing the position of
the motor channel(s). Moves to absolute positions can then be initiated by positioning
the mouse within the display and clicking.

To change the panel view to graphical view, right click in the screen and select
‘Graphical View’.

Fig. 5.6 DC Controller GUI Panel - Graphical View

Consider the display shown above for a DC Motor Drive Card.

The right hand display shows the channel and motor unit parameters; i.e. controller
unit type and serial number, associated stage and actuator type, minimum and
maximum positions, current position, units per grid division and cursor position. All
units are displayed in real world units, either millimetres or degrees.

The left hand display shows a circle, which represents the current position of the
motor associated with the specified controller (absolute position data is displayed in
the 'Chan Pos' field).

The vertical divisions relate to the travel of the stage/actuator being driven by the
controller. For example, the screen shot above shows the parameters for the X-axis
of an MLS203 stage. The graph shows 11 divisions in the X axis, which relates to
105mm of total travel (10 mm per division with the last division being 5 mm).

The graphical panel has two modes of operation, ‘Jog’ and ‘Move’, which are selected
by clicking the buttons at the bottom right of the screen.

The channel functionality of the BBD302/303 controller is accessed via a
single channel GUI panel, one panel for each motor drives fitted.

Note

«
...
33
34
35
36
37
...
»

Содержание BBD301






















































































Отзывы:

Нет отзывов

Похожие инструкции для BBD301

Бренд: NEJE Страницы: 17

Бренд: Oceanic Страницы: 13

Бренд: Taie Страницы: 66

Бренд: Jafar Страницы: 9

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 32

Бренд: ABC Design Страницы: 38

Бренд: easydriver Страницы: 26

Бренд: Calsense Страницы: 10

Бренд: ABC Design Страницы: 10

Бренд: ABC Design Страницы: 10

Бренд: jbc Страницы: 4

Бренд: jbc Страницы: 4

Бренд: MacDon Страницы: 32

Бренд: K&K Страницы: 6

Бренд: OMC Страницы: 18

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды