THORLABS BBD301, Руководство пользователя

Страница: 26 / 85

Chapter 4
Page 25
Fig. 4.5 Stage position Set-points and Changing them via Teach
4.7 The Knob Control: Setting Functionality
As noted in Section 4.5. the knob can control the motor stage position in either
continuous-motion or jog mode; speed is set in the Set Stage parameters page (Fig.
4.4a). The choice of continuous vs. jog action is set via toggle action in the knob select
page (Fig. 4.6a) and the knob sensitivity is set in the final Miscellaneous page (Fig. 4.6b),
again by toggle action (low/medium/ high).
As seen from the page index overview (Fig. 4.1), the knob function (continuous vs. jog
mode) must be set for individual motors and cannot be set for all stages
simultaneously.
Note: this page times out after 20 second of inactivity.
Fig. 4.6 Setting the Front Panel Knob Control Function
4.8 Miscellaneous: Screen Brightness, Knob Sensitivity, Firmware Version, IP
Address, Serial Number
The final Miscellaneous screen (Fig. 4.6b) allows setting of the knob sensitivity (toggle
between low, medium, and high); as this is applied to all stages, the page can only be
accessed via the All Channels route (see page index in Fig. 4.1).
The screen brightness (1-100%) control is also found on this page, and is useful for
operating the controller in a variety of lighting conditions. Selecting the button next to
Brightness allows the change to be made in similar fashion to stage velocity (Fig.
4.4b).
The screen also provides information on:
Firmware version currently uploaded
Controller Serial Number
IP address of the controller.
Note: this page times out after 20 second of inactivity.