THOMSON RP-ITC222, Руководство пользователя

Страница: 4 / 25

Getting started
4
EN
Remote control TV functions
Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with
your set can be used to navigate through the menus and to configure all the general settings.The remote control and its
functions may vary depending on the model of television.The rest of this page contains the description of the most
comprehensive remote control. Optional remote control features are indicated by the symbol
.
Standby / quit standby.
TV
To access TV mode. Press this button to control the television.
VCR
To access VCR mode.
DVD
To access DVD mode.
SAT
To access SAT mode.
AUX
To access AUX mode.
AMP
To access AMP mode.
light
To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is being
programmed (see page 5),
- if the batteries are run down, it flashes when you press a
button.
PIP
To enable the PIP function.
SWAP
To swap the main picture with the PIP picture.
PIP+/PIP-
To change programmes within the PIP function.
ZOOM
To change the size of the PIP picture.
FREEZE
To freeze the main picture.
SLEEP
To access directly the Sleep timer option in the Time
menu.
LIGHT
Remote control light.
To select menu options.
To set functions, change values, enable and disable functions.
4/3 models: to select the picture format.
16/9 models: to select the picture format or zoom.
OK
To confirm a selection.
PRESETS
(red button) sound and picture settings menu
LIST
(green button) list of programmes
INFO
(yellow button) status information
GUIDE
(blue button) programme guide
TEXT
(purple button) Teletext
The coloured buttons can also be used for operating Teletext.
MENU
To access the OVERVIEW menu.
EXIT
To exit the menu structure.
In PIP mode: to disable the PIP function.
+/-
To control the volume.
This function is also available in VCR and DVD modes.
To switch the sound off and back on again.
RETURN
To return to the previous channel/AV programme.
PR+/PR-
To change channels.
0-9
To select a channel by its number. In the case of channel
numbers with two digits:
- press the two digits quickly, or
- press 0 to display “--”, then enter the channel number.
AV
To select an appliance connected to an AV socket.
DEMO
To access demo mode.
Important: If the batteries in your remote control are run down, you can use the buttons on the front of your set, as they have the same functions
as those on the remote control.
ITC222-EN 17/07/03 16:59 Page 4