Operation
16
EN
Setting the time
The
TIME
menu can be used to set the time on the TV set and program
the automatic sleep timer or wake-up timer functions.
Display the
OVERVIEW
menu by pressing the
MENU
button. Select the
Time
option and press
OK
to confirm.
Setting the time
1.
Select the
Clock reference programme
option.
2.
Select a channel with Teletext which can provide the time to be used as a reference using the
buttons, or enter a
channel number using the numeric buttons on the remote control.The time is displayed after a few seconds if it is
available on the selected channel.
If the time is not provided by Teletext the
Wake-up timer
function is not available and a message prompts you to
change reference channel or enter the time manually.You do this by selecting the
Time and date
option and entering
the time using the numeric buttons or the
buttons.
Note: if the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will
disappear if it has been entered manually.You must reset it. We therefore recommend you find the time on a channel and check that it is correct.
Once the time has been set you can use the
Wake up timer
function.
Programming the sleep timer
1.
Select the
Sleep timer
option.
2.
Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the
buttons. Set the time to 00:00
to disable this function.
When the sleep timer is on, a message appears one minute before the television set goes into standby mode. Press any
button on the remote control to cancel standby mode.
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the television to wake you up.
1.
Select the
Wake up timer
option and press
OK
to check the box, which enables this function and provides access to
the relevant options.
2.
Under the
Wake up time
option enter the wake-up time using the numeric or
buttons.
3.
Under the
Switch on for
option, use the
buttons to set the period of time (from 5 minutes to 4 hours in
intervals of 5 minutes).
4.
Under the
Programme number
option enter the number of the channel you want to wake you using the
or
numeric buttons.You can also select an AV programme using the
AV
button. In this case, make sure you programme the
equipment connected to the AV socket to come on as well.
5.
For a daily wake-up check the box for the
Daily
option by pressing
OK
.
6.
Press
EXIT
to close the menu.
7.
Put the TV set into standby mode using the
button on the remote control.
The TV set will automatically switch on at the programmed time and for the programmed duration if you do not interrupt it
by using the remote control.
Return
Sleep timer
00:15
Clock reference programme
02
Time and date
12:34 03/03/03
Wake-up timer
Wake-up time
07:00
Switch on for
01:00
Programme number
10 CNN
Daily
T
ime
ITC222-EN 17/07/03 16:59 Page 16
