21
Operation
EN
Other Teletext functions
Newsflash
When a newsflash is detected, the
or
icon is replaced with a
N
in the navigator. Select it and press
OK
to display
the newsflash. In the case of an update, the Teletext function is enabled and displays the new information.
Subtitles
Some channels provide subtitles for some of their programmes.The number of the relevant pages is specified on the
Teletext index page.
To display subtitles, enable the Teletext function, find the number of the page displaying the subtitles and enter it. Once the
relevant page is found, the subtitles appear in the TV picture.The navigator disappears after a couple of seconds.To display it
again, press the purple (
TEXT
) button.
Alarm page
In some countries (Spain, Benelux, etc.), you can set a time to display certain Teletext pages (alarm pages).
To do this, display the relevant alarm page and enter subpage mode. Enter the time instead of the subpage number (e.g.
1705 for 17:05) and press
EXIT
.The page will disappear and will appear again at the set time, as long as you do not change
channels or switch off the TV beforehand.
Direct access
The yellow and blue buttons on the remote control allow you to access directly those pages whose numbers are displayed
in yellow and blue at the bottom of the screen.
Fastext
Fastext displays a bar at the bottom of the page divided into four coloured sections (red, green, yellow and blue), which
provide links to the topics you can access by pressing the relevant colour button. Other topics accessible in the same way
can also be displayed.
TOPtext
TOPtext displays a bar at the bottom of the page divided into two coloured sections (yellow and blue).The blue section
displays a topic you can access directly by pressing the blue button.The next topic will then appear in the blue section.
The yellow section displays an article you can access directly by pressing the yellow button.The next article will then appear
in the yellow section.
Storing the programme page
If the broadcasting company changes its Teletext pages, you have to store the new programme page to be able to access the
programme guide (see page 22).
To do this, display the current programme page and select the
symbol. Press the
OK
button until the message “
Store
for Program Info: OK. Cancel: 0
” appears at the bottom of the screen. Press
OK
. Press
EXIT
to quit Teletext and
display the programme guide.This should appear within a few moments.
ITC222-EN 17/07/03 16:59 Page 21
