THOMSON K2, Инструкция по эксплуатации, Страница: 289 / 382

September 6, 2006 K2 Storage System Instruction Manual 289
Configuring remaining media servers
2. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click
Check
and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring remaining media servers
On Nearline systems, all media servers are identical, with the exception that only one
media server can be the active media file system server at any time. For this reason
the K2 System Configuration application embeds the configuration and start of the
media file system into the wizard when you configure the first media server, as in the
On this page… Do this…
File System Server
Configuration
This page checks on the
configuration of the media
server in one of its main
roles as a file system server.
The media server also
functions as a file system
client, which is also checked
from this page.
Click
Check
. When the wizard reports that the configuration is correct,
click
Next
.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
Completing the
Configuration Wizard Click
Finish
. The wizard closes. The K2 Media Server restarts. Wait
until all startup processes have completed before continuing. If you are
not sure if startup is complete, wait 10 minutes.