background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                         

CAUTION

                                          

 

 

  Do not modify this appliance. Do not make any adjustments 

unless such work is carried out by authorized personnel, the 

manufacturer or their representative. No parts other than those 

supplied by the manufacturer shall be used on this appliance. 

  Do not allow cooking vessels to overlap the edges of the 

appliance – use the correct sizes of pans and position them 

centrally over the burners. 

  Do not use harsh abrasive cleaners or sharp metal scrapers to 

clean the glass since they can scratch the surface, which may 

result in shattering of the glass. 

  Do not use steam cleaners or pressure washers to clean the 

appliance. Refer to cleaning and maintenance instructions. 

  This appliance is for cooking purposes only. Where this 

appliance is installed in marine craft or in caravans, it shall not 

be used as a space heater. 

  This appliance is not intended to be operated by means of an 

external timer or separate remote-control system. 

  Do not allow oils, fats or food residues to build up on the 

appliance – clean the appliance after each use.  

  If the supply cord becomes damaged it must be replaced by the 

manufacturer or agent in order to avoid a hazard. 

  Do not heat sealed tins of food, they could explode. 

  Do not leave empty pans on a heating zone. 

  Do not use kitchen foil on any part of the hob, it can melt and 

cause damage to the hob surface.  

  If the glass surface becomes cracked, switch off and disconnect 

the appliance from the electrical supply to avoid the possibility 

of electric shock and contact your Service Agent. 

  Metal objects such as knives, forks, spoons and lids must not 

be placed on the hob surface since they can become very hot. 

  This appliance must be earthed. 

Содержание SHB981 Series























Отзывы: