Thetford SHB981 Series, Руководство пользователя и инструкция по установке

Страница: 16 / 22

16
INSTALLATION
Position
A cutout should be prepared as shown in the enclosed diagrams – see Fig. 2 and
Fig.2a for model cutout details. We recommend the underside of the hob be
shielded, particularly if this area is to be used for storage or the installation of
another appliance. The shield should be fabricated from non-combustible
material, but if the enclosure is manufactured from combustible material there
should be a minimum air gap of 30mm between lowest part under hob and the
shield, see Fig 4.
A horizontal distance of 200mm must exist between the edge of the burners and
combustible material unless protected by a layer of non-combustible material. A
non-combustible heat shield (splash back) should be fitted onto the walls directly
behind the appliance.
Fig 5 Minimum Installation Clearances
All combustible materials such as curtains and shelves must be kept well clear of
the appliance. Any fitments such as a cupboard above the appliance must have a
minimum vertical clearance of 500mm between the fitment and the top of the pan
support – see Fig. 5.
The appliance should be fixed in place using the fixing screws provided – see
Fig. 4 for details. Make sure the appliance is fully home and level in the worktop
before fixing securely in place.