4
Nucleic Acid Applications
Measure using a Custom Factor
26 NanoDrop Eight User Guide
Thermo Scientific
2. Enter the
to be used for the calculations and specify a
if desired.
3. Pipette 1–2 µL blanking solution onto the lower pedestals and lower the arm.
4. Select
Blank
and wait for the measurement to complete.
Tip
: If
is On, the blank measurement starts automatically after you
lower the arm.
5. Lift the arm and clean all pedestals with a new laboratory wipe.
6. Pipette 1-2 µL sample solution onto the pedestals and lower the arm.
7. Start the sample measurement: If
Auto-Measure is off, lower arm and select
Measure
.
When the sample measurement is completed, the spectrum and reported values
are displayed (see the next section).
8. When you are finished measuring samples, select
End Experiment
.
9. Lift the arm and clean all pedestals with a new wipe.
Typical nucleic acid spectrum
Содержание NanoDrop Eight
