DeviceLink Connect
Compliance and Certifications | 3
Compliance and Certifications
FCC Compliance
Supplier’s Declaration of Conformity
47 CFR 2.1077 Compliance Information
Unique Identifier:
Generation 3 Mote
Authorized Components Used in Assembly:
Raspberry Pi 3B+ Module, FCC ID: 2ABCB-RPI3BP
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
KLATU Networks, Inc.
4174 NE Lookout Lane
Poulsbo, WA 98370
(619) 684-3115
www.klatunetworks.com
Compliance Information Statements for Raspberry Pi
3B+, FCC ID: 2ABCB-RPI3BP:
FCC Caution:
Any changes or modification not expressly
approved by the party responsible for compliance could void
the user’s authority to operate.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
This device is installed to be operated with a minimum of
20 cm distance between the antenna and user.
ISED Compliance:
This device complies with ISED’s license-exempt RSS
standard(s). Operation is subject to the following two
conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This radio transmitter (IC: 20953-RPI3P) has been approved
by ISED Canada to operate with the antenna on board (the
antenna on board is a Dual band (2.4 GHz and 5 GHz) PCB
niche antenna design licensed from Proant with Peak Gain:
2.4 GHz 3.5 dBi) with the maximum permissible gain
indicated. Antenna not included in this list, having gain greater
than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
The operation of the device in the band 5150-5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems. This
equipment complies with ISED RSS 102 radiation exposure
limits set forth for an uncontrolled environment. This
equipment installed to be operated with a minimum of 20 cm
distance between the antenna and the user.
Note that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and these radars can cause interference
and/or damage to License Exempt Local Area Network
(LELAN) devices.
