Thermo Scientific VARIOKLAV 25T Скачать руководство пользователя страница 54

Страница: 54 / 60

11 Maintenance and cleaning

03/2007

DA0621_a/

Figure 18: Inserting paper into the paper feeder

(

note direction, arrow)

11.4 Changing the ribbon of the integrated printer

If the printout starts to appear faded after a longer period of use, the printer ribbon
should be replaced.

INFORMATION

Do not pull the paper out of the printer. Use the Paper feed key
for this purpose.
Never pull the paper backward, because this may damage the
printer.

♦

Press both the Printer ON/OFF key (26) and the Paper feed key (27)

concurrently.
The printer cover (25) opens.

♦

Remove the printer cover (25).

♦

Hold the left end of the ribbon cartridge with your left hand.

♦

Press on the right end of the cartridge.

This will lift the left end of the cartridge.

♦

Remove the cartridge.

♦

Take a new cartridge.

♦

Insert the left end of the new cartridge in the left corner of the printer

head.
Make sure that the cartridge is parallel to the ribbon guide.

♦

Press the right end of the cartridge down into the right corner of the

printer head.

♦

Replace the printer cover (25). Guide the paper through the slot of the

printer cover (25).

Содержание VARIOKLAV 25T





























































Результаты поиска

Содержание VARIOKLAV 25T

Отзывы:

Похожие инструкции для VARIOKLAV 25T

Бренды по названию

Популярные бренды

Thermo Scientific VARIOKLAV 25T, Руководство по эксплуатации

Результаты поиска

Содержание VARIOKLAV 25T

Отзывы:

Похожие инструкции для VARIOKLAV 25T

Бренды по названию

Популярные бренды