Thermo Scientific SAM12, Руководство пользователя

Страница: 54 / 176

Operating Instructions Issue: 1.0
5-14 SAM12 User Manual Thermo Fisher Scientific
Default: ON
Lock Behaviour:
Lock Doors for
Measurements
Tick this box if the door(s) are to be locked during a
measurement. If the measurement is Clear, both
doors are unlocked.
Default: ON
Lock doors for
Residual
Contamination check Tick this box if the door(s) are to be locked while a
Residual Contamination check takes place –see
Notes regarding Residual Contamination Check
(page 5-60)
.
Default: OFF
Lock Front Door on
Alarm If the SAM12 alarms during a measurement, select
one of the following options for whether the front
door locks:
- Never
- High (i.e. locks on High alarms only)
- All Alarms (i.e. locks on all alarms)
Default: Never
The two door SAM12 is intended for “barrier” applications and
has optional door interlocking to ensure clearance integrity. It
operates in the same way as the single door version, except
when a CLEAR result is obtained the articles may be removed
from the Back (clean) door, as well as the Front (dirty) door.
Select Set-Up|Battery to
configure the Battery Charger
Note that this section is set by at production and should only be
changed in consultation with Thermo Fisher Scientific.
Description of options:
Field Name Description
Discharge Timeout
(Secs) This is the amount of time after the battery
discharges to the minimum discharge voltage before
the charger turns off the output power.
If the charger is already running on battery power,
the value of the timeout will not e changed
The timer can only be stopped if the mains power is
returned
Max. Charge Current This is the maximum current allowed for charging
Notes regarding Two-Door
SAM12
Battery