manualshive.com logo in svg

Thermo Scientific Orion 310, Инструкция по эксплуатации

Поделиться
Скачать
Thermo Scientific Orion 310 Скачать руководство пользователя страница 69

65

PerpHecT

®

 Orion 310, 320, 330 Instruction Manual

Warranty

97-08 DO Probe, Series 100 Conventional Conductivity Cells,
temperature probes and compensators (except those products noted).

•

Orion 93 and 97 ionplus Series sensing modules are warranted to give
six months of operation if placed in service before the date indicated
on the package, except 93-07 and 97-07 Nitrate modules are warranted
to give ninety days of operation if placed in service before the date
indicated on the package.

Six months from date of purchase by the user (or twelve months from
date of shipment from Thermo)

•

Orion Flash Titration™ Probe (Orion 092518), pHuture™ Electrode
(Orion 615700), pHuture MMS™ Pentrode™ (Orion 617500),
Quatrode™ (Orion 617800) and Triode™ (Orion 615800), Low
Maintenance Triode™ (Orion 9107BN), ORP Low Maintenance
Triode™ (Orion 9179BN), and PerpHecT

®

 Low Maintenance

Triode™ (Orion 9207BN), Waterproof Triode™ (Orion 9107WP,
9107WL, 9109WL and 9109WP), QuiKcheK

®

 Meters and Micro

Electrodes.

Three months from date of purchase by the user (or six months from
date of shipment from Thermo)

•

Economy Line Electrodes, Orion 91-05, 91-06, 91-15, 91-16, 91-25,

91-26, 91-35, 91-36, 92-06. Warranty also includes failure for any
reason (excluding breakage), except abuse, provided the electrode is
not used in solutions containing silver, sulfide, perchlorate, or
hydrofluoric acid; or in solutions more than one (1) Molar in strong
acid or base at temperatures above 50 

°

C.

“Out-of-Box” Warranty - Should any of the following products fail to
work when first used, contact Thermo immediately for replacement.

•

Orion Solutions, Standards, Reagents, Cables, Ferrules, Tubing, Line

adapters,  Printers, Software, Cases, Stands, Probe Membranes,
AQUAfast

®

 Test Strips, EZ Flash

®

 columns, Liquid Handling Probes,

Adapter Plates and Racks and general accessories.

For products in the catalog not listed in this warranty statement, please
visit our website at: www.thermo.com

Содержание Orion 310


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды