Thermo Scientific Orion 310 Скачать руководство пользователя страница 17

Страница: 17 / 81

PerpHecT

Orion 310, 320, 330 Instruction Manual

General Information on pH Calibration for Orion 310

B. Autocalibration with One-buffer

NOTE:

Autocalibration with one-buffer can only be

performed using pH buffer 7.00.

1. Attach the pH electrode to the meter.

2. Choose pH 7.00 Buffer.

3. Press CAL key to initiate calibration sequence. CAL is displayed

for 2 seconds. Select calibration range “7” using the SCROLL
(

▲

▼

) keys. Press the YES key to accept. pH 7 will be displayed

for two seconds. Place electrode in pH 7.00 buffer. Reading will be
displayed and updated as calibration continues. When the READY
light comes on, indicating electrode stability, press the YES key
to accept.

4. SLP will be displayed for two seconds. Then 100.0 (or previous

calibration slope value) will be displayed. This value can be edited
using the SCROLL (

▲

▼

) keys. Press the YES key to enter

the value.

5. Meter will automatically go into the MEASURE mode.

The READY light will come on to indicate electrode stability.

6. If operating in the LogR mode or using an ATC probe, the

temperature-corrected pH reading is displayed.

7. Rinse electrodes with deionized water and place into sample.

Record pH directly from the main meter display when the READY
light is displayed or when electrode signal is stable.

Содержание Orion 310


















































































Результаты поиска

Содержание Orion 310

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Orion 310, Инструкция по эксплуатации

Результаты поиска

Содержание Orion 310

Отзывы:

Бренды по названию

Популярные бренды