Thermo Scientific Orion 310 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 81

Thermo Scientific Orion 310 Скачать руководство пользователя страница 34

PerpHecT

®

Orion 310, 320, 330 Instruction Manual

30 General Information on pH Calibration for Orion 320

C. Manual pH Calibration

NOTE:

Manual calibration can be performed

with any user-selected buffer(s). The difference
between manual buffer values must be between
1 and 4 pH units.

1. Attach electrode to meter.

2. Press the SETUP key. Press the YES key until SET or STD is

displayed. Choose the SET option and press the YES key.

3. P1 is displayed in the top readout. Using the SCROLL (

▲

,

▼

)

keys, set user-defined value for the first buffer and press the YES
key to accept new value.

4. Repeat for second buffer value (P2). Press the MODE key to return

to MEASURE mode.

5. Press the CAL key. CAL is displayed for 2 seconds. The last

calibration buffer range will be displayed. Use the SCROLL
(

▲

,

▼

) keys to select the SET option. Press the YES key to accept

this calibration. Pl is displayed. Place electrode into the first
calibration buffer. When READY light is displayed indicating
electrode stability, the user defined buffer value will be displayed.
Press the YES key to accept. P2 is displayed. Repeat for second
calibration buffer.

6. When the READY light comes on, press the YES key to accept

buffer value. SLP will be displayed for 2 seconds while the
calculated slope is displayed.

7. Rinse electrode with deionized water and place in sample.

8. Record pH directly from the main meter display and temperature

from upper field when the READY light is displayed or when
electrode signal is stable.

«
...
32
33
34
35
36
...
»

Содержание Orion 310


















































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды