Thermo Scientific Orion 310 Скачать руководство пользователя страница 49

Страница: 49 / 81

PerpHecT

Orion 310, 320, 330 Instruction Manual

B. Autocalibration with One-buffer

NOTE:

Autocalibration with one-buffer can only be

performed using pH buffer 7.00.

1. Attach the pH electrode to the meter.

2. Choose pH 7.00 Buffer.

3. Press CAL key to initiate calibration sequence. CAL is displayed

for 2 seconds. Select calibration range “7” using the SCROLL
(

▲

▼

) keys. Press the YES key to accept. Place electrode in pH

7.00 buffer. Reading will be displayed and updated as calibration
continues. When the READY light comes on, indicating electrode
stability, press the YES key to accept.

4. SLP will be displayed while 100.0 (or previous calibration slope

value) is displayed. This value can be edited using the SCROLL
(

▲

▼

) keys. Press the YES key to enter this value. If a printer is

connected to the meter, the calibration data will print.

5. Meter will automatically go into the MEASURE mode. The

READY light will come on to indicate electrode stability.

6. If operating in the LogR mode or using an ATC probe,

the temperature-corrected pH reading is displayed.

7. Rinse electrodes with deionized water and place into sample.

Record pH directly from the main meter display when the READY
light is displayed or when electrode signal is stable.

General Information on pH Calibration for Orion 330

Содержание Orion 310


















































































Результаты поиска

Содержание Orion 310

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Orion 310, Инструкция по эксплуатации

Результаты поиска

Содержание Orion 310

Отзывы:

Бренды по названию

Популярные бренды