manualshive.com logo in svg

Thermo Scientific Orion 310, Инструкция по эксплуатации

Поделиться
Скачать
Thermo Scientific Orion 310 Скачать руководство пользователя страница 68

PerpHecT

®

 Orion 310, 320, 330 Instruction Manual

64

Thirty-six months from date of purchase by the user (or forty-two
months from date of shipment from Thermo)

•

Waterproof Meters (Orion 630, 635, 830A, 835A, 260A, 261S, 265A,
266S, 130A, 131S, 135A and 136S), Conductivity Meters (Orion
105Aplus, 115Aplus, 125Aplus, 145Aplus, 150Aplus and 162A),
PerpHect

®

 pH/ISE Meters (Orion 310, 320, 330, 350, 370) pH/ISE

Meters (Orion 210Aplus, 230Aplus, 250Aplus, 290Aplus, 410Aplus,
420Aplus, 520Aplus, 525Aplus, 710Aplus, 720Aplus and 920Aplus),
pHuture MMS™ Meters (Orion 535A and 555A), pH/Conductivity
Meter (Orion 550A), Dissolved Oxygen Meters (Orion 805Aplus,
810Aplus, 850Aplus and 862A).

Twenty-four months from date of purchase by the user (or thirty-six
months from date of shipment from Thermo)

•

Orion ROSS Ultra

®

 Electrodes, Orion AQUAfast

®

 IV Colorimeters,

Orion AQUAfast

®

 IV Turbidimeter, Orion 925 Flash Titrator™, Series

100 DuraProbe™ Conductivity Cells and Series 800 Dissolved
Oxygen Probes.

Twelve months from date of purchase by the user (or eighteen months
from date of shipment from Thermo)

•

Laboratory pH Meters, (Orion 301, 611 and 940), SensorLink

®

,

pHuture™ pH Meters (Orion 610 and 620), Sage

®

 Pumps, Cahn

®

Balances, 930 Ionalyzer

®

, 950 ROSS™ FAST QC™ Titrator, 960

Titrator PLUS

®

, Karl Fischer Titrators, Autosamplers, Liquid

Handling Devices, Liquid Handling Automation Workstations (Orion
AS2000, AS2500 and AS4000), Pumps (Orion SP201, SP201-HR,
SP201-S, Peristaltic and Rinse), pHuture

®

 Conversion Box, Wine

Master

®

, 607 Switchbox, rf link™, AQUAfast

®

 II Colorimeters,

Vacuum Degasser and Flowmeter.

•

Orion EZ Flash

®

 GC Accessory, Orion TEA Analyzer

®

 610 and 510

excluding consumable items carry twelve months warranty only.

•

Orion Ion Selective Electrodes, ionplus

®

 Electrodes, ROSS™

Electrodes, Sure-Flow

®

 Electrodes, PerpHecT

®

 Electrodes, AquaPro

Professional Electrodes, No Cal™ pH electrodes, Standard Line pH
Electrodes, Tris pH Electrodes, KNIpHE® electrode, ORP Triode™
(Orion 9180BN), pHuture™ pH Probes (Orion 616500) and pHuture
MMS™ Quatrode™ and Triode™ (Orion 616600 and 617900), Orion

Warranty

Содержание Orion 310


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды