Thermo Scientific Nicolet Summit, Руководство пользователя

Страница: 37 / 65

Options and Accessories
l
#2 Phillips head screwdriver
l
Thread seal tape (“plumber’s tape” or “Teflon tape”)
❖
To install a purge kit
1. Attach the plumbing assembly to the purge gas source.
a. Install the regulator valve and either a 1/4-inch male fitting or a 3/8-inch female fitting on the
purge gas source. (Choose a valve and fittings that are appropriate for the purge gas source.)
b. If you used a 1/4-inch male fitting, proceed to the next step.
If you used a 3/8-inch female fitting on the purge gas source, install the 3/8-inch to 1/4-inch
reducing nipple that was included with your purge kit. Wrap the reducing nipple with thread seal
tape before you install it, and use an 11/16-inch open-ended wrench to tighten the connection.
34 Nicolet Summit LITE FTIR Spectrometer User Guide Thermo Scientific