manualshive.com logo in svg

Thermo Scientific KingFisher Flex, Руководство по обслуживанию


Поделиться
Скачать
background image

Copyright

 

Copyright 

©

 2008 Thermo Fisher Scientific Corporation. All rights reserved. Printed in Finland. 

Reproduction of the accompanying user documentation in whole or in part is prohibited. 
 

Patents

 

This product is protected by the following patents:  
US 6447729, Method and means for magnetic particle specific binding assay, and US 6448092, Separation 
device for microparticles involving a magnetic rod. 
KingFisher Flex also has national and international patents pending. 
 

Trademarks

 

“KingFisher” and “Microtiter” are registered trademarks of Thermo Fisher Scientific.  
All other trademarks and registered trademarks are the property of their respective holders. 
 

Disclaimer

 

Thermo Fisher Scientific reserves the right to change its products and services at any time to incorporate 
technological developments. This manual is subject to change without prior notice as part of a continuous 
product development. Although this manual has been prepared with every precaution to ensure accuracy, 
Thermo Fisher Scientific assumes no liability for any errors or omissions, nor for any damages resulting from 
the application or use of this information. This manual supersedes all previous editions. 
 

No liability for consequential damages

 

Thermo Fisher Scientific shall not be liable for any damages whatsoever arising out of the use or inability to 
use this product. 
 

Warranty statement

 

Thermo Fisher Scientific Microplate Instrumentation Business products are fully guaranteed against defective 
parts and materials, including defects caused by poor workmanship, for a period of one year from the date of 
delivery. Thermo Fisher Scientific will repair or replace defective parts or materials during the term of warranty 
at no extra charge for materials and labor provided that the products were used and maintained in accordance 
with Thermo Fisher Scientific’s instructions. The warranty is invalid if products have been misused or abused. 
For the warranty to be effective, the product must have been purchased either directly from Thermo Fisher 
Scientific or from an authorized Thermo Fisher Scientific distributor. The guarantee is not transferable to a 
third party without prior written approval from Thermo Fisher Scientific. This guarantee is subject to the 
following exclusions: 

●

 

Any defects caused by normal wear and tear. 

●

 

Defects caused by fire, lightning, flood, earthquake, explosion, sabotage, war, riot, or any other occurrence 
of the type listed above. 

●

 

Refurbished products that are subject to different warranty conditions. 

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, 
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. The seller is not liable for any loss or damage arising out of or 
in connection with the use of the product or other indirect damages. These warranty terms and conditions can 
be obtained from your local Thermo Fisher Scientific dealer. 
 
Consumables are not included in the warranty. 
 

Содержание KingFisher Flex





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для KingFisher Flex

T-Rex BIG FOOT User Manual preview
BIG FOOT
Бренд: T-Rex Страницы: 13
Yamaha MCX-C15 - MusicCAST Network Audio Player Owner'S Manual preview
MCX-C15 - MusicCAST Network Audio Player
Бренд: Yamaha Страницы: 65
Yamaha Audiogram6 Manuel Du Propriétaire preview
Audiogram6
Бренд: Yamaha Страницы: 24
Sweet Sound Electronics Mojo Vibe Instruction Manual preview
Mojo Vibe
Бренд: Sweet Sound Electronics Страницы: 6
TaiShan TQ2550/A Installation preview
TQ2550/A
Бренд: TaiShan Страницы: 5
Landoll Brillion PD Operator'S Manual preview
Brillion PD
Бренд: Landoll Страницы: 64
HABYS AirBubble Instruction Manual preview
AirBubble
Бренд: HABYS Страницы: 20
BioVet Varrox Eddy Troubleshooting preview
Varrox Eddy
Бренд: BioVet Страницы: 2
Zuzi HPM005 Operation Manual preview
HPM005
Бренд: Zuzi Страницы: 2
Daniamant Dan WL3-2 Installation And Maintenance Instructions preview
Dan WL3-2
Бренд: Daniamant Страницы: 4
Gamma Orux 480 Z Profile User Manual preview
Orux 480 Z Profile
Бренд: Gamma Страницы: 23
GAME OF BRICKS Optimus Prime 10302 Instruction Manual preview
Optimus Prime 10302
Бренд: GAME OF BRICKS Страницы: 46
X10 CP290 Owner'S Manual preview
CP290
Бренд: X10 Страницы: 65
Danfoss iSave 40 Operation Manual preview
iSave 40
Бренд: Danfoss Страницы: 101
S.R.Smith Color Light Streams Large Laminar Installation Manual preview
Color Light Streams Large Laminar
Бренд: S.R.Smith Страницы: 10
T+A SACD 1260 R User Manual preview
SACD 1260 R
Бренд: T+A Страницы: 52
Adidas Performance ADI-10242-I Owner'S Manual preview
ADI-10242-I
Бренд: Adidas Performance Страницы: 11
BH FITNESS L530 Instructions For Assembly And Use preview
L530
Бренд: BH FITNESS Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды