Thermo Scientific KingFisher Flex, Руководство по обслуживанию

Страница: 190 / 228

8-14 Testing and Adjusting Version 1.1
Service Manual Thermo Fisher Scientific KingFisher
®
Flex
- Set KF96 plates in plate positions 1-8
- Select “heater up”
- Check that KF96 plate fits smoothly into interchangeable heating block
- Select “heater down”
- Select “heater pos check”
- Check that all KF96 plates fit smoothly into interchangeable heating block
- Remove KF96 plates.
8.3.12 Tip Shield Adjustment
•
Load “Flexshield.key”
- Fasten shelter to tip shield arm
- Set KF96 plate to plate position 1 where deep well tip comb is in place
- Select “shield on”
- Check shield straightness and adjust it when necessary
- Select “shi off left” or “shi off right” to adjust tip shield to center of tips
- Repeat adjustment when necessary
- Click twice “shi off left”
- Select “shield off”
- Select “m bottom” --> No error messages should be found!
- Select “m up”
- Select twice “shi off right”
- Select “shield off”
- Select “shield on”
- Check adjustment is OK
- Select “m bottom” --> An error message is displayed on PC
- Click “OK” to accept error message and select “eak”
- Select “shield off”
- Select “shield test” --> No error messages should be found
- Check that tip comb in KF96 plate does not touch to shield when the shield is not on -->
Select
“pos 2” and “pos 1”
- Switch off instrument
- Close HWDoctor