Thermo Scientific iEMS Incubator, Руководство пользователя

Страница: 34 / 66

Chapter 6: Operation
Thermo Scientific iEMS Incubator / Shaker HT User Manual Rev. 2.4, Cat. no. 1506400A 31
6.5 Preheating and heating
Operation Display
Press
temp
followed by the slot number to display the temperature in a
particular slot, or to start the preheating of the thermal microplate holders.
Press
temp
Press the slot number (
1
–
3
). For example,
Press
1
The actual (TRUE) slot temperature and
heating status (HEAT OFF or HEAT ON)
are displayed.
If the thermal microplate holder is not
installed or inserted correctly, the
display will show:
Press
start
to turn the heating on.
Press
stop
to turn the heating off.
Press a number key or
↵
(Enter) to move to another slot.
Before the temperature has reached the set value, the LED flashes with an
orange color. After the temperature has reached the set value, the orange LED
lights up continuously.
Press
temp 0
to display the heating status of all slots.
If the heating is ON in every slot, the
display will show:
If the heating is OFF in every slot, the
display will show:
If some slots are ON and some are
OFF, the display will show:
At this point, press
start
to turn the heating ON in all slots, or press
stop
to
turn the heating OFF in all slots.
Press
C
to return to the READY state.
Warning: Microplate holders will be hot when touched after use.
PLACES 1-3
HEAT ON
PLACES 1-3
HEAT OFF
PLACES 1-3
HEAT ON/OFF
PLACE NUMBER
PLACE 1 SET 30.0ºC
HEAT OFF TRUE 25.7ºC
PLACE 1 SET 30.0ºC
HEAT ON TRUE 37.0ºC
PLACE 1 SET 30.0ºC
HEAT ON TRUE ##.#ºC
READY 09:29:10