Network requirements
The instrument:
• Is factory-configured for IPv4 TCP/IP communication and includes an Ethernet
adapter (100/1,000 Mbps) with an RJ45-type connector for integrating the device
into a local area network (LAN).
• Can alternatively be configured for wireless networking (High Power USB WiFi
Module required, sold separately as an optional accessory).
The instrument can be configured for
either
wired or wireless networking, not both.
If a Thermo Fisher Scientific service representative is to install the instrument:
• If the instrument will be connected to a LAN, an active, tested network jack must
be in place before the scheduled installation date.
• A representative from your information technologies department must be
available during the installation to help connect the instrument to your network.
Required materials to network the instrument:
• Wired—Ethernet cable of sufficient length with RJ45 connectors
– CAT5 cable for a 100 Mbps network connection
–
or
–
• Wireless—High Power USB WiFi Module (Cat. No. A26774, sold separately)
Instrument specifications
Network requirements
46
iBright
™
CL750 Imaging System User Guide
