6.
If not already done during the license activation, enter the IP address and port of
the SAE console location and then touch
Next
.
Note:
IP address and port location (e.g., 10.X.X.X:8201/admin-
console/index.html) are available in the address bar of the SAE Admin Console.
7.
The system will require the SAE Administrator to enter their credentials to
complete the process. Enter credentials and touch
Next
to complete the
process.
Disable SAE mode
1.
Log in as Local Admin or SAE Console Admin on the iBright
™
instrument.
2.
Touch
Settings
located on the right side of the top tool bar.
3.
Touch
SAE
.
4.
Touch
SAE mode
.
5.
Move the slider to
Disable
, then touch
Next
.
6.
At this point the SAE Admin may need to enter their credentials and touch
Disable
to continue or
Cancel
to leave the SAE mode enabled.
7.
If user touches
Disable
, then the following warning will pop up:
Note: SAE users will not be able to access their current images when SAE
is disabled. You can backup or export those files before disabling SAE.
Image files remain on the system and can be accessed when SAE mode is
enabled again.
Note:
It is recommended an SAE Admin perform this action. If a Local Admin
performs this action then it will not be recorded in the audit history on the SAE
Admin Console.
Sign in to the instrument in SAE mode
1.
Enter your SAE username and password in the SAE login window.
Note:
Your username and password must be created by the SAE Admin on the
SAE Console prior to logging in.
2.
Touch
Sign In
. After signing in, you may be prompted to change your SAE
password.
IMPORTANT!
The following symbols cannot be used in your password:
+ &
% \
Note:
The following characters can be used in addition to letters and numbers
for passwords:
- _ ( ) [ ] { } / ~ ! @ # $ * ^ = . , ' " : ; | < > ?
Invitrogen
™
iBright
™
SAE Software Solution for 21 CFR Part 11 Support
Disable SAE mode
36
iBright
™
CL750 Imaging System User Guide
