5
3. Carefully lift the BPC out of the box (Figure 8) and
place on a raised, flat surface. Fold up the cardboard
flaps to release the BPC from the cling wrap on the
cardboard insert. Remove and discard the insert
(Figure 9).
Figure 10. Cutting open the outer polybag.
Figure 11. Pulling the outer polybag away
from the BPC.
6. Ensure the DynaDrive S.U.B. door is still open. Push
the blue and black button on the hub cover located at
the top of the S.U.B. to unlock it (Figure 12). Swing the
cover open (Figure 13).
4. Use a safety cutter to carefully open the outer polybag
(Figure 10). Take care to not damage the BPC.
Figure 12. Pushing button on hub
cover.
Figure 13. Hub cover opened.
Figure 14. Raising BPC lift lever.
Figure 6. Slitting open taped
sides of the BPC box.
Figure 7. BPC secured to cardboard
insert in box.
Figure 8. Carefully lifting out the BPC.
Figure 9. Folding up flaps
on the insert.
5. While another operator holds the exposed end of the
BPC in place, pull the outer polybag away from the
BPC (Figure 11). Repeat this step to remove the inner
polybag once the BPC is in the clean room and ready
to be loaded.
7. Raise the BPC lift mechanism lever fully, which will
simultaneously lower the bearing hub port (Figure 14).
