Thermo Scientific Finnpipette Novus Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 40

background image

Thermo Fisher Scientiﬁ c

Thermo Scientiﬁ c Novus SCP/MCP User Manual

23

Reassembly:

1-10 µl pipettes

1. Put the spring hatch 25, the spring 16, spring support 17 and the tube 18

back on the piston.

2.  Slide the bigger O-ring 19, smaller O-ring 20 and tube 21 on the piston.
3.  Slide the small spring 22, spring support 23 and O-ring 24 on the tube 21.
4.  Carefully slide the entire assembly into the tip, then push the spring hatch

25 down and turn it 90 degrees.

5. Take the upper ejector top 11 between ﬁ ngers and pull it down.
6. Push the tip cone into the handle while holding the ejector top 11 down, until

you hear a “click”.

7.  Reassemble the lower tip ejector sleeve 13 (snap ﬁ tting).
8.  Press trigger to reconnect the piston to drive mechanism.
9.  Press READY to return from service mode.

5-50 µl pipettes:

1. Put the spring hatch 25, the spring 16, spring support 17 and the tube 18

back on the piston.

2.  Slide the bigger O-ring 19, smaller O-ring 20 and O-ring support 21 on the
piston.
3.  Slide the small spring 22 on the piston.
4.  Carefully slide the entire assembly into the tip, then push the spring hatch

25 down and turn it 90 degrees.

5. Take the upper ejector top 11 between ﬁ ngers and pull it down.
6. Push the tip cone into the handle while holding the ejector top 11 own, until

you hear a “click”.

7.  Reassemble the lower tip ejector sleeve 13 (snap ﬁ tting).
8.  Press trigger to reconnect the piston to drive mechanism.
9.  Press READY to return from service mode.

10-100 µl pipette:

1. Put the spring hatch 25, the spring 16, spring support 17 and the O-ring 20

back on the piston.

2. Carefully slide the entire assembly into the tip, then push the spring hatch

25 down and turn it 90 degrees.

3. Take the upper ejector top 11 between ﬁ ngers and pull it down.
4. Push the tip cone into the handle while holding the ejector top 11 down, until

you hear a “click”.

5.  Reassemble the lower tip ejector sleeve 13 (snap ﬁ tting).
6.  Press trigger to reconnect the piston to drive mechanism.
7.  Press READY to return from service mode.

«
...
21
22
23
24
25
...
»

Содержание Finnpipette Novus









































Отзывы:

Нет отзывов

Похожие инструкции для Finnpipette Novus

Бренд: Bard Страницы: 144

Бренд: GALBIATI Страницы: 8

Бренд: NEILPRYDE Страницы: 55

Бренд: HANYOUNGNUX Страницы: 4

Бренд: Park House Healthcare Страницы: 6

Бренд: J&M Страницы: 33

Бренд: Velp Scientifica Страницы: 12

Бренд: Yamaha Страницы: 24

Бренд: J&M Страницы: 33

Бренд: Labnet Страницы: 12

Accublock D1301

Бренд: Labnet Страницы: 13

Бренд: Rath Страницы: 5

Бренд: Tar River Страницы: 26

Бренд: ZOLL Страницы: 38

Бренд: ZOLL Страницы: 36

Nature2 Fusion soft

Бренд: Zodiac Pool Systems Страницы: 52

Бренд: G21 Страницы: 7

Heart Guardian AED

Бренд: Radian Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды