Doc. 065214-02 1/12
19
after a sample has been defined.
3. Click
Next>
.
To define standard samples:
1. Define one or more standard samples now, or
omit this step and define standard injections
later.
2. Click
Next>
.
To save the sequence:
1. Enter a
Sequence Name
and specify where to
save the sequence (see
2. Click
Finish
to save the sequence, and then
click
Done
.
The sequence created here is a starting point only.
You can add additional samples, change injection
parameters, and edit the program and method
files. Refer to the Chromeleon or Chromeleon
Xpress Help for details.
Run the Sequence
1. On the panel tabset, click the
Sequence
Control
tab.
2. Under
Prepare System
, click
Load Sequence
3. Browse to the sequence created in the
Application Wizard and click
Open
.
Figure 36. Example Application Wizard:
Unknown Samples
Figure 37. Example Application Wizard:
Standard Samples
Figure 38. Example Application Wizard:
Saving the sequence
Figure 39. Sequence Control Panel:
Loading a sequence