Doc. 065214-02 1/12
9
Create a Timebase
The USB Auto Configuration Wizard (see
) appears automatically when you power
up a USB device that is not already assigned to a
timebase. Use the wizard to create a new timebase
for your Dionex ICS-900.
1. Review the names displayed in the
Unassigned USB Devices Detected
list.
Clear the check mark before the name of any
device that you do not want to configure at
this time.
2. In the
Mode
window, select a predefined
configuration template for the new timebase.
3. (Optional) Select the
Launch Server
Configuration upon closing this wizard
check box. The check box is disabled if the
Server Configuration program is already
running.
4. Click
Accept
to create a new timebase.
If you selected the
Launch Server Configuration
upon closing this wizard
option, the Server
Configuration automatically opens when you
close the wizard (see
). If the Server
Configuration was already open, it is updated with
the new configuration information.
Configure Devices
When a device is added to a timebase, default
configuration properties are selected. You can
verify that the default settings are correct for your
system and select other settings, if needed.
1. In the Server Configuration, right-click the
Dionex ICS-900 device in the timebase and
select
Properties
.
2. Verify that the correct device is assigned to
control the injection valve in the Dionex
ICS-900.
a.
On the Dionex ICS-900 Properties dialog
box, click the
Inject Valve
tab.
b. For Pump_InjectValve, verify the
Controlled By
setting:
If the timebase includes an AS, the
Controlled By setting
must be
AS
Figure 18. USB Auto Configuration Wizard:
Creating a timebase
Figure 19. Server Configuration
Figure 20. Dionex ICS-900 Properties:
Inject valve controlled by AS
