Thermo Scientific Barnstead GenPure, Руководство по эксплуатации

Страница: 60 / 106

12
System control GenPure
The OEM Menu
54 GenPure Thermo Scientific
The OEM Menu
Basic settings and limiting values can be changed in this menu. To make such changes in the
OEM-menu, the system must be unlocked first (see
“Code lock” on page 53
).

You need the right code to do this transaction. You can find the code under section
“Code lock” on page 53 .
Accessing the OEM menu.
.
A press on the menu-button takes you to the next menu prompt.After system control has been
unlocked, simultaneous presses on the Interval-button and the Nonstop-button call the OEM menu.
Following this, the "OEM menu Press Enter" prompt is displayed. When this is confirmed with Enter,
the first menu prompt can be worked on. To simplify changing settings, press the UV-button to select
the individual number in the numerical value which you want to change. Now use the arrow buttons
to enter the wanted number from 0 to 9 at that selected position. Press Enter to save changes only.
The display shows:
Set the limiting value for temperature
The maximum operating temperature limit for the system is set here. Should this temperature be
exceeded, the fault message “
Max. temperature ” is triggered. This is shown in the 3rd line of the display.
Basic setting: 35 °C

Setting range: 1 - 50 °C
After enter the OEM menu press the menu-button once then the display shows: