Thermo Scientific Barnstead GenPure, Руководство по эксплуатации

Страница: 57 / 106

12
System control GenPure
User menu
Thermo Scientific GenPure 51
Disinfection Procedure
A sixth press on the menu-button calls the question asking if a disinfection is to be carried out. A press
on the enter-button confirms this, following which the demand “
Disinfection cartridge must be fitted ” is
shown. When this has been fitted, a confirming press on the enter-button triggers the disinfection
procedure. The pump starts for the full time set in the OEM-menu and, when the half of this time has
elapsed, the rinsing solenoid valve opens and stays open until the disinfection procedure has finished.
The demand "
New Filterset must be fitted " is then displayed. When this has fitted, confirmation with
the enter-button causes the system to return to the last operating state.
The remaining disinfection time is counted down and displayed during disinfection.
Step Action Figure
1 Press the menu-button 6 times then the display
shows:
2 Confirm disinfection by pushing the enter
button.
Change the filter cartridge with the disinfection
cartridge (see under chapter
“” on page 65 ).
3 Confirm with enter.
The Disinfection is started for 30 min, indicating
the remaining time.

The completely process is described under section “” on page 65 .