Thermo Scientific Barnstead GenPure, Руководство по эксплуатации

Страница: 71 / 106

13
Maintenance
Change the ultrapure cartridge
Thermo Scientific GenPure 65
8
The Code to do this transaction please refer from
the Code table „code lock” found in chapter
“Code lock” on page 53 . You need a level one
code.
a. Press Menu to CODE screen. Enter level
1 code (150, 250 or 350). Press Enter.
b. Press Menu to “Change ultrapure
cartridge” screen. Press Enter.
c. Enter new serial number of the ultrapure
cartridge in by pushing the button
nonstop or Interval to change the digits
and the UV button to go to the next
value.
d. When you are finished, press enter and
the new serial number is saved. You can
only use a serial number one time.
e. If after this process the system says
“change cartridge” the cartridge is either
expired or it is out of the date range of
the system. Check the date and time in
OEM menu and try again. .
.
9
Discard at least 5 liters of water.
Step Action Figure